Finnegan's Garage Ep.67: Did I Just Install the Widest Front Wheels on a Chevy C10 Ever? 

Näkymät 969 t.
98% 9 535 160

I'm gonna drive my 1967 Chevy C10 this summer. That's my goal. Before I can proceed with the remaining fabrication projects on this truck, though, I need to nail the wheel and tire fitment. In this episode I work with 2 U Tires to find find the perfect wheel and tire combination for my truck and show you how to fit the widest wheels and tires possible on your lowered car or truck.
The key is a tool called the Gryp-R. It's a fixture that bolts onto the hub of your ride and holds nearly any tire in place so that you can check the fitment before you spend your hard-earned cash on the wrong set of wheels and tires. It's easy to use and as you'll see in this video you can get all the critical measurements done in a matter of minutes.
I ended up stuffing the widest tires I've ever seen on the front of a lowered Chevy C10; I ordered a set of 295/30ZR20 Michelin Pilot Sport 4S tires from Summit Racing and then had Forgeline build a set of GA3R wheels in 20x10.5 size with 4-inches of backspacing. The wheels have Forgeline's optional "open lug" design and are extremely light.
You can find the tires here:
And the You can check out the wheels here:
For more information and a DISCOUNT on this tool or Scott Blair's mobile tire installation service visit this link: www.thewheelfit.com/fsm.html

Autot ja ajoneuvot








Lisää soittolistaan:

Oma soittolista
Katso myöhemmin
Kommentteja 100   
98snakeeater 23 päivää sitten
Anyone know of a service like this in central Florida? Looking to have custom wheel made fo rmy car, but wanna make sure I have clearance all around
B ONeal
B ONeal 25 päivää sitten
So sick 👍
Jeremy Martin
Jeremy Martin Uukausi sitten
Do you know anyone that does this in Denver?
Mech Head
Mech Head Uukausi sitten
Awsome! Thanks
Richard S
Richard S Uukausi sitten
Ya shame the Gryp-R is $650.00 not $250.00
Rickey Racer
Rickey Racer Uukausi sitten
That IS Awesome Mike. Roll On!
Damien Riggs
Damien Riggs Uukausi sitten
Damien Riggs
Damien Riggs Uukausi sitten
I could use the old wheels
JRSFOUR _ Uukausi sitten
Please drop everything else and finish the c10. I'm dyin over here...
Peterson Oliveira
Peterson Oliveira Uukausi sitten
Boa noite FIRST vai amém bom trabalho
troy combs
troy combs 2 kuukautta sitten
Nothing like the grypr tool being marked up to 700 bucks since this video
Custom FX Builds
Custom FX Builds 2 kuukautta sitten
Bad ass truck But most ask also some specs on your backspacing on the front
ronnie9471 2 kuukautta sitten
Ok so I never watch stuff about wheels and tires.. But your tires guy is the SHIT...!!!! I wouldve never thought of decompressing the tire, and all the other small things he talked about that introduced such clarity to my life, and tire opinion.. But that air ride kit is SLOW AF.. lol
Car Painter 19
Car Painter 19 2 kuukautta sitten
Those low profile tires always make me cringe while driving😆
bob marley
bob marley 3 kuukautta sitten
I thought I had an original idea when I set up a trailer with a mount and balance set up going to my friends to set their wheels up :( his stuffs way better than mine
Bubba Kushington
Bubba Kushington 3 kuukautta sitten
Those are some pretty ass wheels. Damn didnt even need any weights to balance the wheel man I love it.
ewok 4 kuukautta sitten
Wheel specs please?
joseph mccoy
joseph mccoy 4 kuukautta sitten
Never mind I found it. $629
joseph mccoy
joseph mccoy 4 kuukautta sitten
Who is selling this tool and what is it's actual name?
Tristan Boyce
Tristan Boyce 4 kuukautta sitten
so i see 20x12 in the rear, but what about fronts? Also whats backspacing? Im trying to find wheels for my 70!
Dale Martinez
Dale Martinez 4 kuukautta sitten
......and the we are going out for a steak dinner....
Mr. P.Dribbles
Mr. P.Dribbles 5 kuukautta sitten
Whole Florida story boils down to = I saw an opportunity to make a bunch of money so I went there and "helped" others....but really helped myself to a bunch of cash.
Miguel Rodriguez
Miguel Rodriguez 5 kuukautta sitten
So what are doing with the old rims 🤞🏻😂
Kyle Perkins
Kyle Perkins 5 kuukautta sitten
My shop uses hub centric adapters inside, plus fingers outside. We also deal with brand new Corvettes.
EL GATO LOCO 6 kuukautta sitten
Do they make this chassis ready to buy? Or did you piece all this together? Id love to have a same chassis like this for my 63 c10
Dylan Chandler
Dylan Chandler 6 kuukautta sitten
If ole boy thinks those are heavy I have a duramax with forged 26x16’s and 40’s he can sling around
c0wb0yTV 6 kuukautta sitten
less wheel and tire commercial more build please
Joseph Burnham
Joseph Burnham 6 kuukautta sitten
Pretty cool. Hope your buddy makes lots of money on his inventions! 👍🇺🇸
B Lierbag
B Lierbag 6 kuukautta sitten
Sil truck built. Im digging the wide tires. Suspension is off the hook top to bottom!
Eldermtaylor 7 kuukautta sitten
Finnegan I need info on getting a tire van and into the business.
bad68chevy 7 kuukautta sitten
I'm not sure if this has been asked but what is the pros and cons of the hydro shocks vs air bags? Is it a better ride quality and better adjustment with the shocks? Were they custom made ? Sweet ride!!
Old School
Old School 7 kuukautta sitten
To each his own but I just don't see how or why anyone would want their vehicle on the ground lol
DragonFarts 8 kuukautta sitten
Hey guys, who make the tire and wheel tool?? I want one?? Going rot the Hydroshoxs from Mitch for my 63 VW Bus
DragonFarts 8 kuukautta sitten
where do I order one??
BROTHERS KEEPER 8 kuukautta sitten
dave3883 8 kuukautta sitten
damn that looks so bad ass
Phillip Orne
Phillip Orne 8 kuukautta sitten
That tire machine he has to help separate and install the tire from the wheel is actually pretty cool I have used one of those before. DEFINITELY saves you a lot of time and a lot of broken faces and knuckles! Really cool
Nick Finley71
Nick Finley71 8 kuukautta sitten
It’s just a rim parking break hahhha
Evan Field
Evan Field 8 kuukautta sitten
That C-10 looks so sick and it's going to be a monster when it's finished with that supercharged power house.I have always wanted to build a C-10 they are the coolest looking trucks in my opinion
Evan Field
Evan Field 8 kuukautta sitten
That C-10 looks so sick and it's going to be a monster when it's finished with that supercharged power house.I have always wanted to build a C-10 they are the coolest looking trucks in my opinion
john dodd
john dodd 8 kuukautta sitten
Good to have Ford parts on that Chevy
Keith Dunham
Keith Dunham 9 kuukautta sitten
What an UGLY truck
ok 9 kuukautta sitten
Thats a 911 GT2RS tire 🤠
Jerry Bittner
Jerry Bittner 9 kuukautta sitten
Just my opinion but 22's never looked good to me, I like some sidewall on my tires with a nice competition or street performance stance.
tommy brockman
tommy brockman 9 kuukautta sitten
That truck definitely deserves those wheels and tires that truck is clean sir
tommy brockman
tommy brockman 9 kuukautta sitten
That tool is amazing I skipped around in the video did they say that guy invented that tool? Like he patented it and is getting royalties for it right? That’s awesome
Senior Pablo Raul Francisco
Senior Pablo Raul Francisco 9 kuukautta sitten
Yo Finn reach out to me sell me that blue haro BMX bike in the beginning of the episode
TrickStang 9 kuukautta sitten
Scotts pro setup is one of the most coolest this ive seen, I enjoy watching the pros engineers at work, thanks for the vid.
Andrews lawn care
Andrews lawn care 10 kuukautta sitten
Is it supposed to be so loud when you raise it up
DJd34d1 10 kuukautta sitten
"I used to be worried about length. Now I'm worried about girth."
Jesus Garcia
Jesus Garcia 11 kuukautta sitten
Your truck is awesome. Thank you for sharing. I have another question. How do I contact Scott to see if he has any opportunities in the Texas market.
Oscar Walton
Oscar Walton 11 kuukautta sitten
Massive improvement hope to see it going under it's own power soon 😎
J E 11 kuukautta sitten
That wheel fitment tool is priceless
XOZ Industries
XOZ Industries 11 kuukautta sitten
Looks great, the 335's wouldn't fit?
Dana T
Dana T 11 kuukautta sitten
Just curious can you turn the wheel at all when the truck is sitting on the ground, do the tires hit the fenders or do you have to keep them straight? Wondering why you didn’t go with something in-between so you could turn the wheels a little while slammed? Either way sick truck and keep up the bad ass builds.
Charles Xavier
Charles Xavier 11 kuukautta sitten
In this episode... Finny gets a bit buzzed and decides to work on C-10
john smith
john smith 11 kuukautta sitten
This is the first time in my life that I ever got emotional over a set of rims and tires !!!!!!
MrDarndak Vuosi sitten
Now that’s a set of wheels! Great info on the mount/balance. The three piece wheel and tire combo probably cost as much as my Challenger!
The Dusty Shed
The Dusty Shed Vuosi sitten
garage envy sucks
send it
send it Vuosi sitten
you can also break the bead back down and spin the tire on the rim and drop alot of weight i picked my car up last year at walmart and the guy had 3.25 ounces on the front tires imagine if it threw a weight walmart is cheap but so is their work LOL love that truck not much on pancaking it but it looks awesome all the way up must be very nice to have sponsors and companies wanting publicity
Captain Flatbed.
Captain Flatbed. Vuosi sitten
That’s a badasss truck. Wheels are get what ya pay for! those are of the best for sure no weights
Charles Shawley
Charles Shawley Vuosi sitten
Justin Bounds
Justin Bounds Vuosi sitten
ICUSteal Vuosi sitten
Carl Aycock
Carl Aycock Vuosi sitten
andrew may
andrew may Vuosi sitten
J Hawk
J Hawk Vuosi sitten
These are the most badazz wheels ive ever seen. Nice choice ! I really want to see some more content on this truck
Rick Gibson
Rick Gibson Vuosi sitten
, right on Tire Guy awesome stuff
ArizonaXR Vuosi sitten
Martin Stinson
Martin Stinson Vuosi sitten
Want to see more of ur c10 build bro from start to finish. Love ur channels
Sam Thomas
Sam Thomas Vuosi sitten
Chop the top, it would look much better.
Lurch Meister
Lurch Meister Vuosi sitten
what aluminum spindles are you using in the MRC Fab front kit?
John k
John k Vuosi sitten
Now let's get it done!
nivesknight Vuosi sitten
So how much would all that cost the rest of us.......
John Creed
John Creed Vuosi sitten
Okay I'm impressed by not only the new wheels but also your tyre guy and his experience. 👍
Casey Hill
Casey Hill Vuosi sitten
You still didn't shave the drip rail
Dopey NightlifeTV
Dopey NightlifeTV Vuosi sitten
Sick machine bro 💪
Adam Pike
Adam Pike Vuosi sitten
Waste cuz this truck will never be finished 2033 will be having save conversation
mike hay
mike hay Vuosi sitten
Quality tyres;)
Zai Vuosi sitten
U sell this truck?
bob m
bob m Vuosi sitten
61 years I've been changing my own tires and now He tells Me to let the air out to settle the tire on the rim.
bob m
bob m Vuosi sitten
Finnegan that truck rebuild is God's way of telling you that you have too much money. you have managed to totally ruin a great truck. yes it is your truck but I can still morn.
Tellun YT
Tellun YT Vuosi sitten
that guy talks way too muh the other guy, not finnegan
Zach Burke
Zach Burke Vuosi sitten
I really wish you would post more about this truck!!
Tom Brenes
Tom Brenes Vuosi sitten
Aluminum 18 in front 20 in the rear c1o dog dish cap all around. Electric steering is better
Classicskid956 Vuosi sitten
Looking good Finnegan's garage are the wheels and tires same backspacing and size all around?
Wally Jarhead
Wally Jarhead Vuosi sitten
Hey meow...gettin there man. Those wheels really look mean with the stance.
james Junior
james Junior Vuosi sitten
I would love to take the old wheels and tires off your hands,, dry rot don't care,, it would look siick on my S10 step side...😎😎😎 pickup,,ex cab black in color,, ,, love the tire guys idea for the tire van,, awesome, awesome,, exspecially in Iowa, or small towns, charge half price of the others,, be a millionaire,, as long as you can get the tires, ordered,, and shipped in time....
Hank Holzman
Hank Holzman Vuosi sitten
Finnegan, Thanks so much for being here!
david brown
david brown Vuosi sitten
22s were the way to go, pick a dif. Style
Mk OsoPac
Mk OsoPac Vuosi sitten
Que hermoso proyecto !!!!! Dios bendiga a todas las mentes creativas que nos enseñan como hacer mejoras en nuestros autos clásicos saludos desde la Ciudad de México.
John Lynch
John Lynch Vuosi sitten
Send those 22s to me I’m in GA I’ll come get em lol
kevin topasna
kevin topasna Vuosi sitten
that is cool C10 i can't wait to see it done.
ricky D
ricky D Vuosi sitten
Such a sick truck..
Sven3xs Vuosi sitten
20:12 - You do understand. The reverence is real ;-)
Isaiah Witika
Isaiah Witika Vuosi sitten
Thanks for staying on FIplace I enjoy your content 🤙🏼
BoMbToWn ReCoRdZ
BoMbToWn ReCoRdZ Vuosi sitten
When is this goin to be done? I been waiting along time........ we all wana see this done. Its a bad ass truck... lets go 2020.... better be done
Keith Lawrence
Keith Lawrence Vuosi sitten
Do u still have the c10 what year is that truck
John Kyle
John Kyle Vuosi sitten
I want to slap the shit out of that salesman
R.J,'s Smokin Pitt
R.J,'s Smokin Pitt Vuosi sitten
Do you think the forge line rims will do well on a Ford supersnake 2019? If not what's ur advice?
TIKTOKS you need to watch
Näkymät 8 milj.
Very Unsettling ASMR
Näkymät 981 t.
My Thoughts on Reality Shifting
TIKTOKS you need to watch
Näkymät 8 milj.
Very Unsettling ASMR
Näkymät 981 t.
My Thoughts on Reality Shifting
Volvo's Key can do THIS!!
Näkymät 4 milj.